Wood Turning Accessories

Large Square Radius Carbide Cutting Tool

The Savannah Large Carbide Turning Tool is designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Large Square cutter (item # 10750) is ideal for smoothing out cuts and for working convex surfaces with it’s slightly rounded profile. The Savannah Large Square Carbide turning tool eliminates the need for sharpening of your turning tools since it features a rotatable cutter head. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter (item # 10750). To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss.

Easy wood turning on your lathe with Savannah Carbide Turning tools.
The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head.

Features:

• Sharpening not necessary
• Last longer than steel tools
• Replaceable cutter heads
• Solid ash handle with soft rubber grip
• Shaft length is approximately 6-1/2”
• Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule
• Square carbide cutter head included

Solid Carbide Stays Sharper for Longer

All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter.

Enjoyable Turning

To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule.

The square tool measures appx. 6-9/16" from the tip of the cutter to the ferrule

Large Round Carbide Cutting Tool

The Savannah Large Carbide Turning Tool is designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Large Round cutter (item # 10747) is ideal for curved, concave surfaces and can also be used for general woodturning applications. The Savannah Large Round Carbide turning tool eliminates the need for sharpening of your turning tools since it features a rotatable cutter head. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter ((item # 10747). To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss.

Easy wood turning on your lathe with Savannah Carbide Turning tools.
The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head.

Features:

• Sharpening not necessary
• Last longer than steel tools
• Replaceable cutter heads
• Solid ash handle with soft rubber grip
• Shaft length is approximately 6-1/2”
• Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule
• Round carbide cutter head included

Solid Carbide Stays Sharper for Longer

All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter.

Enjoyable Turning

To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule.

The round tool measures appx. 6-9/16" from the tip of the cutter to the ferrule

Large Diamond Carbide Cutting Tool

The Savannah Large Carbide Turning Tool is designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Large Diamond cutter (item # 10754) perfect for achieving smooth finishes in tight, small areas like detailed beads and coves in spindle turnings. The Savannah Diamond Carbide turning tool eliminates the need for sharpening of your turning tools since it features a rotatable cutter head. All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter (item # 10754). To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss.

Easy wood turning on your lathe with Savannah Carbide Turning tools.
The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head.

Features:

• Sharpening not necessary
• Last longer than steel tools
• Replaceable cutter heads
• Solid ash handle with soft rubber grip
• Shaft length is approximately 6-1/2”
• Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule
• Diamond carbide cutter head included

Solid Carbide Stays Sharper for Longer

All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter.

Enjoyable Turning

To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while your turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the butt to the stainless steel ferrule.

The diamond shaped tool measures appx. 6-5/8" from the tip of the cutter to the ferrule

Hollowing Carbide Turning Tool Set

Hollow forms can be one of the most gratifying wood turning projects you can do. The result when you complete your hollow form is a tremendous sense of accomplishment. The overall look and feel of a piece of wood that is hollowed out with uniform side walls is very unique and usually begs the question, did you make that? That just may be wood turners' favorite response to projects they show friends and family.

Now You Can Hollow Forms With Confidence!

The Savannah Hollowing Tools are perfect for larger hollowing turning projects. Instead of cutting the wood which can sometimes cause the tool to catch, the Savannah Hollowing tools employ a razor-sharp carbide cutter that shears the wood. The flat bar in combination with the carbide cutter makes the hollowing process easier by helping you keep your tool parallel to the lathe bed. This means much less tool movement and much less chance for catching. Now you can hollow forms with confidence!

Heavy Duty Flat Steel Bars

Hollow forms can be a bit tricky since it’s difficult to see inside of the form when you’re turning. Most hollowing tools have a heavy, cumbersome round shank that can be difficult to control. This makes hitting your marks difficult and sometimes dangerous. The Savannah Carbide Hollower tools eliminate this issue with heavy duty flat steel bars with a replaceable carbide tip cutter.

19" Heavy Duty Wood Handle

The Savannah Hollowing Tools each have a heavy hardwood handle that is a full 19” long to provide you with plenty of leverage for larger hollowing projects. The tools are held on to the handle with a heavy-duty ferrule for extra stability. The base of each handle is flush wrapped with a comfortable rubber grip to help absorb vibration and reduce hand fatigue.

Tungsten Carbide Tip Cutter

The carbide tip cutter is made from tungsten carbide and is designed to shear the wood versus cutting the wood like traditional hollowers. This helps produce a better finish which in turn means less sanding. When it's time, you can loosen the set screw and rotate the cutter a quarter turn to cut with a fresh, razor-sharp edge. When the cutter is used up, simply replace the carbide cutter with a new one (replacement cutter not included).

3 Piece Carbide Mini Turning Tool Set

Easy wood turning on your lathe with Savannah Carbide Turning tools. We all know how "enjoyable" sharpening our turning tools can be. We also know that if you don't have the tool at just the right angle when turning, the results can be undesirable. With the Savannah Carbide Mini Turning Tool Set you can eliminate the inconvenience of sharpening your turning tools and with the flat bottom bars on each tool you’ll be able to easily turn most any type of project! When the carbide cutter on the tool finally dulls, simply loosen the cutter screw, rotate the tip and secure the screw for a fresh, clean cutting edge. Carbide cutters will stay sharper longer when compared to standard turning tools. However, once needed, the cutters are replaceable. This set includes 2 of each cutter style and extra screws.

The Most Complete Mini Carbide Turning Tool Set

With everything you need to get started right out of the box, this mini carbide turning tool set is perfect beginners and advanced turners alike. Made from high quality materials and with well thought out features.

Flat Bottom Bars Make The Turning World Go Round

The unique flat bottom bars on the Savannah Mini Carbide Turning Tools makes the turning process much easier than with traditional turning tools. The flat bottom help you keep the tool straight and prevents unintentionally "rolling" the bar to one side or the other. This helps produce wonderful looking results each and every time you use these tools.

Bottle Stoppers, Mini Cowboy Hats, Goblets, Pencil Holders and More!

Let your imagination run wild! Create most any type of turning project you can imagine using these mini turning tools!

3 Piece Turning Tool Set

Easy wood turning on your lathe with Savannah Carbide Turning tools. The Savannah Large Carbide Turning Tools are designed with ease of use in mind. It is ideal for wood turners of all skill levels and helps ensure success right from the start. The Savannah Carbide turning tools eliminate the need for sharpening of your turning tools since it features a rotatable cutter head.

Set Includes

Set includes the Large Round (# 7537), Square (# 7538) and Diamond (# 7539) cutter tools. The round tool measures appx. 6-9/16" from the tip of the cutter to the ferrule, the square tool measures appx. 6-9/16" from the tip of the cutter to the ferrule and the diamond shaped tool measures appx. 6-5/8" from the tip of the cutter to the ferrule

• 1 ea. Large Round Cutter Tool
• 1 ea. Square Cutter Tool
• 1 ea. Diamond Cutter Tool

Sharper for a longer period of time

All you have to do is rotate the the cutter head for a clean, sharp edge and continue turning. The solid carbide stays sharper for a longer period of time in comparison to steel tools. Once the cutter head is completely used, simply replace it with a new carbide cutter.

Flat back for stability

To make turning even more enjoyable, the shaft of the Savannah Carbide Turning Tool also features a flat back for stability while you're turning. The solid wood ash handle is coated with a comfortable rubber grip on the base that transitions to the wooden top part of the handle seamlessly. The comfortable rubber grip helps reduce hand fatigue while turning. Handle length is approximately 13-1/2” from the end to the stainless steel ferrule. With the Savannah Large Carbide Turning Tool, you can get right to turning without all the fuss.