The Savannah Large Hollowing tools have been designed for hollowing larger forms
on your lathe. With its 19 ¾” hardwood handle along with the heavy duty steel
bars make these the ideal hollowing tools for the serious wood turner. Turn
vases, large bowls, urns and more with these three tools.
›See more product details
Hollowing Carbide Turning Tool Set
Hollow forms can be one of the most gratifying wood turning
projects you can do. The result when you complete your hollow
form is a tremendous sense of accomplishment. The overall look
and feel of a piece of wood that is hollowed out with uniform
side walls is very unique and usually begs the question, did you
make that? That just may be wood turners' favorite response to
projects they show friends and family.
#1
The #1 Hollower is designed to remove
most of the material in the center of your hollow form.
With its straight bar, the #1 Hollower is perfect for
working the center of your project
Tool Bar: 1/2” Sq x 8.5”
#2
The #2 Hollower has a hooked neck to
help work further out on the side walls of your hollow
form. Perfect for clearing out the mid-range or
intermediate areas in all your hollow forms.
Tool Bar: 3/8” x 3/4” x
7-3/4”
#3
The #3 Hollower has an even more
pronounce hook on the end for working the side wall even
further. The #3 tool will allow you to work all the out
the inside lip of your hollow form project
Tool Bar: 3/8” x 3/4” x
7-3/4”
Now You Can Hollow Forms With Confidence!
The Savannah Hollowing Tools are perfect for larger hollowing
turning projects. Instead of cutting the wood which can
sometimes cause the tool to catch, the Savannah Hollowing tools
employ a razor-sharp carbide cutter that shears the wood. The
flat bar in combination with the carbide cutter makes the
hollowing process easier by helping you keep your tool parallel
to the lathe bed. This means much less tool movement and much
less chance for catching. Now you can hollow forms with
confidence!
Heavy Duty Flat Steel Bars
Hollow forms can be a bit tricky since it’s difficult to
see inside of the form when you’re turning. Most
hollowing tools have a heavy, cumbersome round shank
that can be difficult to control. This makes hitting
your marks difficult and sometimes dangerous. The
Savannah Carbide Hollower tools eliminate this issue
with heavy duty flat steel bars with a replaceable
carbide tip cutter.
19" Heavy Duty Wood Handle
The Savannah Hollowing Tools each have a heavy hardwood
handle that is a full 19” long to provide you with
plenty of leverage for larger hollowing projects. The
tools are held on to the handle with a heavy-duty
ferrule for extra stability. The base of each handle is
flush wrapped with a comfortable rubber grip to help
absorb vibration and reduce hand fatigue.
Tungsten Carbide Tip Cutter
The carbide tip cutter is made from tungsten carbide and is
designed to shear the wood versus cutting the wood like
traditional hollowers. This helps produce a better finish which
in turn means less sanding. When it's time, you can loosen the
set screw and rotate the cutter a quarter turn to cut with a
fresh, razor-sharp edge. When the cutter is used up, simply
replace the carbide cutter with a new one (replacement cutter
not included).
Features:
Sharpening not necessary
Last longer than steel tools
Replaceable cutter heads
Solid ash handle coated with soft rubber grip
Shaft length is approximately 8”
Handle length is approximately 19-3/4” from the butt to the stainless
steel ferrule
Round carbide cutter head included
Please Note: When
using Easy Wood Tools or Carter replacement cutters on Savannah Tools,
please check screw is 8 x 32 tpi to verify proper fit.
Please Note: The
carbide cutter on this tool is NOT interchangeable with any of the other
Savannah Carbide Turning Tools (7537,7538 & 7540).
California Residents: WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov.
Carbide Cutting Tool
7762
Large Hollowing Straight Tool #1
$89.99
7763
Large Hollowing Tool #2
$99.99
7540
Large Hollowing Tool #3
$99.99
7764
Large Hollowing Tool 3 Pack (includes all 3
hollowers)
$289.99
7650
Replacement Cutter
for Savannah Hollowing Cutting Tool
$15.99
7767
Negative Rake Cutter (Includes
Screw & Wrench)
$18.99
Carbide Tipped Easy Hollowers™
The Easy Hollower was designed to offer a revolutionary new approach to turning
hollow forms. These Patent Pending tools allow any skill level to achieve
professional results for hollowing work with minimum effort and worry. Choose
the tool that best fits your needs. The Mid size Hollowers are for smaller
projects up to 3-1/2” in diameter and the Full and Pro size Hollowers are for
larger projects up to 5” in diameter.
Note: The Mid-size Hollowers come with the Ci5 round carbide
cutter tip. The Full and Pro size Hollowers come with the Ci3 round carbide
cutter tip.
Please Note: When using Carter replacement cutters
on Easy Wood Tools, please check screw size to verify proper fit.
California Residents: WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov.
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov.
